Indicative Lux calculator
MiniConfine 1200
1182.ENA.T
General information | |
---|---|
Application field | Facade, Little walls, Walls, Covered entrances & walkways |
Constructive & Dimensional | |
Gaskets | Silicone gaskets |
Construction material | Stainless steel AISI 316L, Extruded aluminum EN AW-6060 T5 high resistance to oxidation, Die-cast aluminum EN AB 44100 highly resistant to oxidation |
External screws | Stainless steel A4-70 treated with highly antioxidant water-repellent lubricating solution |
Height / Projection [mm] | 3 |
Cutout length [mm] | 1280 |
Cutout width [mm] | 71 |
Rough in housing | Polypropylene to be ordered separatly |
Drainage | 300mm of gravel or draining material. Alternatively, draining piping system. |
Static load [Kg] | 500 |
Electrical | |
Description | 1 x 36 W LED 3000 K CRI>90 1 x 3504 lm |
Luminaire efficiency [lm/W] | 62.1 |
Fixture consumption | 40.9 W |
Operation Range | 220-240 V - 50/60 Hz |
Number of circuits | 1 |
Driver positioning | Integral |
Control gear type | Electronic |
Dimmer type | DALI on request |
Cable entry | Nylon cable gland M20 Ø 7/13 mm |
Daisy chain wiring | External to the luminaire with IP68 connector available as an accessory |
Cable type | H07RN8-F 3x1mm2 |
Cord length [m] | 0.5 |
Water-Lock system | Included |
Ambient temperature operating range [°C] | -20 °C ÷ +40 °C |
Optical | |
Beam angle [°] | 78° x 47° |
Light distribution | Asymmetric flood (wall washer) |
Beam directionability | Fixed optics |
Swivel [°] | 21° |
Diffuser material | Tempered glass 8mm |
Diffuser finish | Transparent - extra clear |
Diffuser temperature [°C] | < 40 °C |
Optics | Anti UV technopolymer reflector |
Lighting Source | |
Luminaire emission [lm] | 1 x 2541 |
LED / Bulb | Included |