Clessidra
Code:
GH1507.CGXT400EN
GH1507.HBX.T
GH1507.HBX.T
Series of bollards and pole with minimal design available in various heights. Designed to illuminate squares, avenues, paths, parks, walkways and gardens without glaring. With its strong steel base and the construction of the head in high oxidation resistant aluminum alloy which is subjected to nano-bonderite treatment and finished with texturized polyester powder paint, making the product resistant to atmospheric agents and UV rays, guaranteeing maximum protection over the years. The solid construction of the product makes it resistant to winds of over 160km/h and resistant to vandalism. Silicone gaskets ensure maximum sealing in all operating and temperature conditions. The ribbed and opal polycarbonate diffuser silconated directly to the head makes it highly resistant to impact and allows for an homogeneous light distribution. The external screws are in stainless steel and on request also available in a vandal-proof version for those installations on public areas. The inspection door at the base of the pole allows wiring to be carried out quickly and safely. The product is installed using pressure tie rods to be screwed directly into the ground or through tie rods embedded in the concrete. The product is equipped with the Ghidini water-lock system that prevents the rising of humidity from the power cable due to the alternating on and off cycles.
design by Ikon Design
General information | |
---|---|
Application field | Parking lots, Squares, Cycle paths, Walkways and driveways, Avenues |
Constructive & Dimensional | |
Gaskets | Silicone gaskets |
Construction material | Steel, Extruded aluminum EN AW-6060 T5 high resistance to oxidation, Die-cast aluminum EN AB 44100 highly resistant to oxidation |
External screws | Stainless steel A4-70 treated with highly antioxidant water-repellent lubricating solution |
Diameter [mm] | 193 |
Height / Projection [mm] | 2400 |
Electrical | |
Description | 1 x 25.2 W LED 4000 K CRI>90 1 x 3146 lm |
Luminaire efficiency [lm/W] | 37.8 |
Fixture consumption | 28.6 W |
Operation Range | 220-240 V - 50/60 Hz |
Number of circuits | 1 |
Driver positioning | Integral |
Control gear type | Electronic |
Dimmer type | Dim on request |
Cable entry | Metal cable gland M20 Ø 7/13 mm |
Daisy chain wiring | External to the luminaire with IP68 connector available as an accessory |
Cable type | H07RN8-F 3x1mm2 |
Cord length [m] | 0.5 |
Ambient temperature operating range [°C] | -20 °C ÷ +35 °C |
Optical | |
Beam angle [°] | 360° |
Light distribution | Other |
Beam directionability | Fixed optics |
Glare index | Light pollution control |
Diffuser finish | Micro-prism |
Lighting Source | |
Luminaire emission [lm] | 1 x 1081 |
LED / Bulb | Included |