Clessidra 1100 by Ikon Design

Clessidra

Code:

GH1506.CGXT300EN
1506.HAX.T

Series of bollards and pole with minimal design available in various heights. Designed to illuminate squares, avenues, paths, parks, walkways and gardens without glaring. With its strong steel base and the construction of the head in high oxidation resistant aluminum alloy which is subjected to nano-bonderite treatment and finished with texturized polyester powder paint, making the product resistant to atmospheric agents and UV rays, guaranteeing maximum protection over the years. The solid construction of the product makes it resistant to winds of over 160km/h and resistant to vandalism. Silicone gaskets ensure maximum sealing in all operating and temperature conditions. The ribbed and opal polycarbonate diffuser silconated directly to the head makes it highly resistant to impact and allows for an homogeneous light distribution. The external screws are in stainless steel and on request also available in a vandal-proof version for those installations on public areas. The inspection door at the base of the pole allows wiring to be carried out quickly and safely. The product is installed using pressure tie rods to be screwed directly into the ground or through tie rods embedded in the concrete. The product is equipped with the Ghidini water-lock system that prevents the rising of humidity from the power cable due to the alternating on and off cycles.

design by Ikon Design

CE marking

EAC marking

UKCA marking

Class I

IP65

IK10

Light pollution control

Dim on request

Class E

Steel

Extruded aluminum EN AW-6060 T5

Die-cast aluminum EN AB 44100

General information
Application field	Parking lots, Squares, Cycle paths, Walkways and driveways, Avenues


Constructive & Dimensional
Gaskets	Silicone gaskets
Construction material	Steel, Extruded aluminum EN AW-6060 T5 high resistance to oxidation, Die-cast aluminum EN AB 44100 highly resistant to oxidation
External screws	Stainless steel A4-70 treated with highly antioxidant water-repellent lubricating solution
Diameter [mm]	193
Height / Projection [mm]	1100


Electrical
Description	1 x 25.2 W LED 3000 K CRI>90 1 x 3100 lm
Luminaire efficiency [lm/W]	37.2
Fixture consumption	28.6 W
Operation Range	220-240 V - 50/60 Hz
Number of circuits	1
Driver positioning	Integral
Control gear type	Electronic
Dimmer type	Dim on request
Cable entry	Metal cable gland M20 Ø 7/13 mm
Daisy chain wiring	External to the luminaire with IP68 connector available as an accessory
Cable type	H07RN8-F 3x1mm2
Cord length [m]	0.5
Ambient temperature operating range [°C]	-20 °C ÷ +35 °C


Optical
Beam angle [°]	360°
Light distribution	Other
Beam directionability	Fixed optics
Glare index	Light pollution control
Diffuser finish	Micro-prism


Lighting Source
Luminaire emission [lm]	1 x 1065
LED / Bulb	Included